Runner in Dock, Plamokojo

When making a plastic model, it is common for scattered runners to reduce the efficiency of making a plastic model, such as expanding the runners and narrowing the work space, making it difficult to find the runner you want to use.

[Runner in Dock] is an epoch-making item that improves the work efficiency of plastic model production so that the runner can be easily found, taken out, and handled efficiently while minimizing the space for placing the runner. As it is foldable, it can be stored neatly without getting in the way after use.

Compact dock for one box of plastic model

The product area is designed for one general plastic model box. By stacking the runners high, you can work in an organized state without cluttering while minimizing the space of the runners. Up to 8 sets of storage plates can be used, and most types of 1/144 scale kits are supported.

Storage space that can be adjusted according to the height of the runner

Insert the partition plate into the partition plate outlets on the left and right from the bottom and place the runner. The space between the plates is designed in increments of about 1 cm, and by inserting the next plate upward while matching the height of the runner placed underneath, it is possible to store while using the space without waste. Since it is a plate type, it is not easily affected by the thickness of the runner and can be stored stably.

Top and base surfaces where small parts can be placed

The top and base surfaces of [Runner in Dock] are flat, and you can prevent them from being lost by placing polycaps, small runners, stickers, etc.

Work space is neatly organized

By using [Runner in Dock], runners are not scattered in the work space, so you can secure a wider and cleaner work space.

Foldable for compact storage

[Runner in Dock] can be folded compactly. The attached partition plate can also be stored in the dedicated space, so it does not take up space and does not interfere with subsequent work.

Compatible with plastic models with many parts

The plastic model, which is relatively large and has a large number of parts, can be used with almost all kits by arranging two of these products side by side.

* Some oversized kits may not be supported.

▼ Product introduction & usage ▼

Product Specifications

◆ Size

• Approx. 242mm x 241mm x 245mm (when assembled)

◆ Accessories

• Runner in dock x 1
• Partition plate x 16

◆ Material

• Runner tag clip, partition plate: ABS

◆ Body price

• ¥ 3,200 (excluding tax)