REVIEW Robot Spirit [SIDE MS] NZ-666 Kshatriya, Baofeng Model

The following is a review of REVIEW Robot Spirit [SIDE MS] NZ-666 Kshatriya, Baofeng Model, a Robot Damashii action figure released by Bootleg factory Baofeng Model based on the original model of the Kshatriya from Mobile Suit Gundam Unicorn.

Baofeng Robot Damashii [SIDE MS] NZ-666 Kshatriya Review

In fact, the Robot Damashii itself is Bootlegally produced (basically produced by Bootleg foundries). As a finished toy, it is not too good. The early product pricing is considered to be relatively conscientious, but the later price is getting higher and higher, plus various Restrictions, business hype, and some products once became sky-high prices, and this Kshatriya made by the Baofeng Model this time is one of the fetishes that are currently priced at a high price.

I have seen some Robot Damashii unicorns from the cottage factory before, and it was really appalling, but the product of this Baofeng Model gave me But it is a bright feeling, the overall appearance is very clean, the surface treatment of the parts is good, there is no very obvious rough matte feeling, the detail processing is OK, basically it is restored in place, and the painting is not too serious. problem. Each part is considered a relatively satisfactory product.

Articulation and Movability

For this finished RoDa toy, tightness, joint retention, etc. are all relatively core issues. After all, if this thing is loose and loose, it really doesn't feel good.

However, in this product from the manufacturer, the joints of all parts are very tight, and the holding force of the wing joints, leg joints, and hip joints is very high, and the joints at the connection positions of the 4 large leaves are made of With the gear engaged joint, even if the 4 blades are installed, there is still enough holding force and will not slip off easily.

The joints of the lower plate are very powerful. Even if the upper body is covered with huge blades, the lower body can still stand firm and stand upright, and there will be no problem of leaning forward and backward due to excessive weight.

In terms of mobility, the design of the original version is basically restored, and it is also due to the excellent design of the original version, so the mobility is very good, and it can perform many difficult movements, such as squatting, bending over, and splitting. Basically nothing.

Material

In terms of material, the manufacturer's mold processing is still relatively powerful. Although the Kshatriya is a very round body, some small details and outlines have a good performance, even the small details of the arm coat of arms. Still drawn very clearly.

The surface of the parts is relatively smooth and smooth, and the degree of reduction is very high. If you don't directly compare and compare the genuine version directly or enlarge the picture for comparison, it is indeed difficult for people to distinguish the difference between the Bootleg version and the genuine version at once.

In addition, the joints, which have a relatively large load-bearing capacity, are all made of high-strength hard materials such as POM (commonly known as plastic steel), so there is no need to worry about the breakage caused by insufficient material strength.

Option and Accessories set

The configuration is basically done according to the original configuration. The Funnel, the Funnel special effect, the ejector special effect, the special effect support, the bracket, are basically complete, no more or less.

Summary

The above is the review of various parts of the Bootleg Baofeng Robot Damashii Kshatriya. As a sample, there are still several small problems. As far as personal experience in the past few days, I found the problems as follows:

The combination of the bracket and the body It is not very tight (although it is not very loose at present, but it is often easy to slip off because the body is too heavy when playing with the bracket

The combination position of the large ejector (spout) with 4 large leaves and the leaves is relatively loose, and it is easy to fall off when playing . (The question has been answered, and it will be corrected in large quantities.)

The hilt of the red lightsaber is the wrong color. The original version is blue, and the sample is gray. (The problem has also been reported, and the large goods will be corrected.)

The ankle is a bit loose. After it is fully assembled, it may be unstable and the problem of falling forward and backward may occur because the center of gravity is not placed properly. (However, it is reported that the original version has a similar problem, but the problem is also reported to the manufacturer, and I hope that the large-scale goods will be optimized)

The samples of the movable joints of the abdomen and waist are a little loose and not firm enough. (It is reported that large goods will be adjusted)

Overall, the Robot Damashii Kshatriya of this Baofeng Model is indeed a very good Gundam mod, and its performance in all aspects is relatively high. Except for the few minor problems mentioned above, the others are basically not found. What is the major irreversible problem? Now that the genuine version is in full swing, it can give players a more affordable and cost-effective choice.

It is indeed very exciting. If the problems of the samples can be corrected, then it is really a good idea. It is a masterpiece of Bootleg finished products. At present, the manufacturer's pricing is also very considerate. The price of 188 can have such a high-quality performance, which is really eye-catching. I hope that after this first bomb is completed, it will bring you more and better kits.