REVIEW Metal Build GN-0000/7S 00 Gundam Seven Sword, Metal Gear

The following is a review of Metal Build GN-0000/7S 00 Gundam Seven Sword, a action figure die-cast alloy inner-frame released by bootleg factory Metal Gear based on the original model of the Mobile Suit Gundam 00V side story.

Metal Gear Metal Build GN-0000/7S 00 Gundam Seven Sword Review

Details

Head unit, indeed, the restoration degree is not enough compared to the original Bandai version, but it is not too ugly, it is okay, and then the reply from the manufacturer is that it can no longer be modified at present, the head should be the same as the big one. .

The problem of capacitive transparent parts, the original version is relatively transparent, and the sample is relatively cloudy and fuzzy. Of course, this large product will be corrected.

Some details of the parts still have problems such as wrong color or wrong assembly, such as: the combined seam of the crotch, the color of the parts on the inside of the arm, etc. These problems will be corrected in bulk.

Movability and Articulation

The tightness of the joints is indeed better than the original version. Everyone should have seen the pictures and videos, and then the lateral movement of the crotch is still not tight enough, but not too loose. The feedback from the manufacturer, Metal Gear on this issue is that large goods will be adjusted.

There is still a problem of looseness in the sample of the abdominal movable mechanism, and the problem has also been reported. The answer is that the bulk goods will be adjusted.

There are still some combination problems in the combination of some weapon accessories. For example, there are still some problems in the combination of the connecting pieces of weapons mounted on both sides of the skirt and the auxiliary accessories mounted on the sword.

Finishing

Many parts of MB finished toys rely on painting to express details and color separation. Unlike assembled products, which can be expressed in parts, the quality of painting is also the key to directly affecting the effect of the entire product. Judging from the manufacturer's current large-scale product, the coating has been done well.

The effect of pad printing. There are still some defects in the pad printing and coating of the samples, such as pad printing errors, coating out edges, etc. The answer is that the bulk goods are remade and will be corrected.

Some areas of pad printing seem to have problems of fading or not in place. I don't know if it was scratched during the delivery process. Although it does not affect the overall effect very much. Mainly the edge positions of some accessory weapons, not very obvious, it still feels uncomfortable.

The main body is not equipped with a GN Blaster, nor is the original Bandai version. But the weapons of the Master Grade plastic model kit 00 Gundam Seven Sword can be borrowed and installed and used directly without modification. But it can only be held. If you want to mount it, you must make certain modifications.

The whole is done very neatly, no serious flash or uneven surface defects are found, and the pad printing of logos and patterns is also in place. There is a very serious problem with the print. From the current appearance, although it cannot be 100% restored, to be honest, it has already achieved 80% of the effect, which is not ugly.

The blue outer armor is the primary color of plastic, but the manufacturer uses full coating for the effect. The painting is also done well, and the paint surface is all Very flat, no large-area paint problems or uneven paint surfaces were found. But there are still some small areas where the paint surface is not flat enough, but they are all invisible or inconspicuous places.

Summary

This is the review of Metal Gear Metal Build GN-0000/7S 00 Gundam Seven Sword. In terms of pad printing, some spelling errors and wrong location signs of the previous samples have been corrected in release version. But there are still some mistakes in some places, but it is estimated that they cannot be seen because the signs are too small. The Whole paint wear resistance of the surface is also relatively high.

As a finished product, the tightness of the joints is also an important factor affecting the quality of this product. However, manufacturers have very high requirements for quality, and they will not be sloppy. Compared with the attitudes and practices of those manufacturers who have all kinds of originals on their lips all day long, but all kinds of products are not good when they come out, it is really the so-called attitude that determines everything. The tightness of the bootleg produced joints is indeed better than the original ones, and it is comfortable to play.

The overall structure of the product is basically 1:1 according to the original version. At present, after playing with it, we have not found any problems of shortening the structure or omitting the movable mechanism. In terms of the treatment of alloy materials, the manufacturer has also done a good job. Meticulous, most of the exposed parts are polished smoothly and evenly, and even some of the original mold parting lines have been unevenly polished, and the manufacturer has handled them quite well.

In general, this bootleg Metal Gear MB Seven sword is indeed a product worth considering. Its quality and appearance have met the requirements of his pricing,