REVIEW Metal Build GN-0000+GNR-010 00 Raiser, Metal Gear

The following is a review of Metal Build GN-0000+GNR-010 00 Raiser, a action figure die-cast alloy inner-frame released by bootleg factory Metal Gear based on the original model of the Mobile Suit Gundam 00 series.

Metal Gear Metal Build GN-0000+GNR-010 00 Raiser Review

Packaging and Safety

The inner package is basically the same as the original packaging method, but it is worth mentioning that this time the antenna part It is individually packaged and sealed. Previously, many builders of MC-Metal Gear 00 Gundam Seven Swords found that the antenna was crushed due to packaging problems after the arrival of the goods. This time, it should not exist. However, the improved packaging method in order to avoid the problem is still worthy of praise.

Finishing

The head problem in the previous MB 7 sword products, still have. That is not divided and relies on painting, because there are problems with the pure painting head.

Paint overflow and other problems, and this time 00 Raiser uses a re-parted head, chin, antenna, and face are independent parts, And the mask part is no longer pad printing, but engraved lines, which avoids the problems caused by painting and pad printing.

However, the painting of mask is a bit thick, which makes the face look a little weird. If you have the ability, you can consider repainting the mask part.

The overall paint finish of this 00 Raiser is better than that of MC-Metal Gear 00 Gundam Seven Swords. It's slightly better, can't say it's too good, but it is definitely an improvement compared to the previous product.

The paint surface is smoother than the Metal Gear Seven sword, and the color is relatively lighter than the Metal Gear Seven sword, it looks more pleasing to the eye, and the parts The nozzle part of the armor has also been optimized to a certain extent. Many nozzles of the outer armor are basically hidden, and there are basically no obvious nozzle positions on the surface.

Details

The most obvious improvement this time should be the transparent parts. Previously, the transparent parts of MC-Metal Gear 00 Gundam Seven Swords have been criticized for being dark and opaque. It is said that there is an improvement problem since the second batch of MC-Metal Gear 00 Gundam Seven Swords.

This time the color of the 00 Raiser transparent parts is almost the same as the original color, the synchronization rate is more than 90%. The material is quite transparent this time, even if the transparent parts are separated You can also clearly see the pattern logo inside the GN capacitor, which is very good.

Movability and Articulations

The problem of joint tightness is also a topic that everyone is more concerned about, because some people felt that it was too tight and not smooth enough to play in the previous MC-Metal Gear 00 Gundam Seven Swords. Adjustment and optimization, most of the joints are just tight and tight, and the holding force is also good.

There is no problem that the joints are too loose due to the adjustment of the joints. However, metal has fatigue after all. After playing for a long time, the metal joints will also be loose, so tight joints are still beneficial.

In the previous MC-Metal Gear 00 Gundam Seven Swords, many Builders reported that the waist was crooked, and the feedback was more concentrated. This time, Metal Gear 00 Raiser there is no such problem, it is normal.

Summary

There is review of Metal Gear Metal Build GN-0000+GNR-010 00 Raiser a bootleg action figure metalbuild from MC - Metal Gear. The problem of painting and dyeing still exists. It is estimated that many people will win the lottery after the large goods. I hope the manufacturers can control this aspect more to reduce the occurrence of problems.

Some parts still have some flashing problems, but they are not too many, and they can basically be handled by themselves, and it is not a very serious problem.

The rotating part of the waist is still a little tight. You need to use a little force when you rotate it for the first time. However, after the rotation, there is no problem of too tightness, and it is relatively smooth. Everyone should pay attention to this problem. The first time you rotate the waist Don't twist it too violently, turn it slowly and forcefully, and then turn it left and right, and then it will be fine.

In terms of pad printing, especially the white part, the color is still relatively light, the background color can be seen in some patterns, and there is still a problem that the pad printing is not in place in some positions.

To sum up, this MB 00 Raiser product is a relatively cost-effective product. Its quality The advantages brought by the price and the price are very attractive.