REVIEW MG 1/100 Daban 6655 LM314V23/24 Victory 2 Assault-Buster Gundam, Daban Model

This is a review of Daban 6655 MG 1/100 LM314V23/24 Victory 2 Assault-Buster Gundam, an assembly plastic model kit Gunpla released by Daban Model based on the Mobile Suit Model from Mobile Suit Victory Gundam series.

Daban 6655 MG 1/100 LM314V23/24 Victory 2 Assault-Buster Gundam Review

The original limited set is based on the Bandai version, with some joints. Improvements and adjustments, such as shoulder joints, arm joints, etc., are all optimized for the purpose of changing the original C buckle part into a left and right combined joint structure to increase the stability of the kit at one time.

So for those of you who are worried about whether this is this or that, please take a look here. It’s the same when it’s made in China, and it also has these new joints, so there’s no need to ask about it. It's just that there is an additional set of limited light wings for this Daban Model set, so there is no need to buy them separately for the light wings.

Snapfit

The combination of the recent Daban 66 series products is not too bad, and there are not too many problems. And this 6655 has fewer problems. The structural problems that the original version has are not within the scope of discussion. It is actually found that there are no more than 5 places in total that need attention and modification.

However, there are only 2 places that are likely to cause problems such as broken parts. Compared with the recent Daban 66 series products, it is really very good. There should be some problems, but the problem of shrinkage seems to have not been discovered.

Joints

Because the product itself has a structure involving disassembly and deformation, it will not good as Original. In fact, looked at the problem with this attitude, so when the evaluation began, do not to disassemble it and play with it again. After a round of disassembly and deformation, it seems that no major problems were found.

The buckles are relatively tight, and there will be no problem of loosening after installation. On the contrary, because the buckle is tight, it needs to be disassembled with the aid of tools, but even so, no problems such as damage to the buckle caused by such disassembly have been found. This is a little accident, and it was not found during the deformation process.

It is basically just right to say that it cannot be deformed or is too loose due to the combination problem. Only when the chest is separated from the body, it needs to be disassembled with the help of tools. So after experience, the deformation part is not a big problem. However, it should be emphasized here that although it can be changed, considering that the structure itself is not so good, many places are fixed by means of C buckles.

The big test, no matter the original version or the Daban Model version, I personally think that it may not be able to withstand this kind of multi-deformation play operation. This is one of them. Furthermore, it is also due to the fact that the structure itself is too loose.

If you deform and play many times, it is difficult to ensure that the joints will not be loosened or worn due to frequent deformation. After all, this thing is not a transformer, the two are different. It can only be said that things can be changed, but it is indeed not recommended to repeatedly deform like this especially for those who are not very familiar with the structure, if you are not careful, it is easy to break the joints or something.

Movability and Articulation

The movable part basically inherits the problem of the original version. It is also because of the structural problem, so the movable part can be said to be infinitely close to 0, the waist is not movable, and the crotch is very movable due to the problem of the ball. You can only do back and forth swings.

There are also various interferences on the shoulders due to the problem of the shoulder armor. These original problems are basically copied in their original form. Of course, the kit itself comes with a universal bracket, it is still possible to install the bracket and perform a few simple movements.

As for the face, this is a matter of opinion, except for the accident that the engraved line is made deeper and thicker. Adjust it according to the evaluation. In fact, there is no big problem. There is definitely a difference.

Water-slide Decal

The water sticker part, which seems to be a common problem of manufacturers, because the water sticker itself is not glued. It is recommended to use a blue cover for the water sticker, so it is easy to appear after you want to play with the water sticker. The problem of the water stickers being rubbed off, so if you are interested in playing, the suggested process is to set up the elements first, play enough, and then apply the water stickers at the end, so there is no problem.

Yes, it is very painful, and it falls off while playing with the water stickers, and because there are various defects involved, many water stickers are located in the parts where some components are combined with each other, and they will be easily scraped off when they are assembled and disassembled. So don't mess around with the water stickers, just a handsome corpse station.

Summary

This is review of Daban 6655 MG 1/100 LM314V23/24 Victory 2 Assault-Buster Gundam from Daban Model. For the board parts, there is not much change as a whole. It is still the same familiar taste and formula as before. Except for some parts with a little burr, there are also shrinkage of some parts fortunately, not too much, and not obvious. As for what kind of meat, dirty, and so on, those are all clichés, and the overall level is still the normal level of the manufacturer.

In terms of configuration, in fact, it can be seen from the picture that the product itself is made on the basis of the original limited set, and at the same time, it is made by packing the original limited light wing accessories package sold separately, so it is considered a one-shot.

And because the original version has modified and improved some single-piece joints and some parts on the limited set, this set of 6655 also inherits these improved parts. Those who are worried about joints and other issues can rest assured. The part of the board is probably as mentioned above. As for the detailed evaluation, it will be updated and released one after another.