METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model
METAL PARTS TLX-01 for Bandai RG 1/144 RX-93 ν Gundam released by TLX is a replacement part of several parts in Real Grade Nu Gundam.
TLX-01 METAL PARTS for RG Nu Gundam
The Real Grade 1/144 Nu Gundam now gets a conversion kit Metal Parts to make it look even better and strong. This conversion kit was released by TLX with adjustments to the inner-frame RG Nu Gundam. The Gunpla Model Kits must be purchased separately.
This Conversion Kit can be used for RG Nu Gundam. Has several replacement parts made of metal that can be snapfitted with Real Grade plastic parts.
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
TLX-01 METAL PARTS for RG Nu Gundam set contents
- Metal Parts
- POM Parts
TLX-01 METAL PARTS for RG Nu Gundam Details
- 1/144 Metal Parts conversion
- Material: Die-cast, plastic
- Publisher: TLX Model
- Price: Approximately 4,500 yen
- Release Date: February 2023
REVIEW TLX Model METAL PARTS RG 1/144 RX-93 ν Gundam
This is review of TLX Model METAL PARTS RG 1/144 RX-93 ν Gundam for Bandai Real Grade Gunpla Nu Gundam.
The overall performance of the TLX Model alloy frame is relatively standard. The so-called standard means that it is basically on the same level as the manufacturers of the alloy frame on the market.
Performance
The performance of the alloy parts is quite satisfactory, there are no major problems, and the structure is basically the same. The combination of mainstream POM+alloy is adopted, so the performance of the current samples is good, and the frame itself is assembled at the factory, so it does not need to spend too much time to assemble alloy parts. And most of the frame itself is made of The assembled structure does not use a lot of screws to fix, except for the hips and waist.
The accuracy of the skeleton is quite good, as far as the performance of the skeleton itself is concerned, in terms of quality, it can make People are satisfied.
Snapfit
As for the degree of combination, the combination of most of the parts is fine and smooth, but there are still some problems with the combination of individual parts and it is basically not bad.
Actually, the matching degree of this kind of alloy skeleton is more or less problematic among the brands. And after the combination and replacement, the joints of the skeleton and the main weighing parts are basically very tight.
Therefore, the stability of the entire model kit will be further improved, especially in terms of feel, from a light plastic RG kit, after replacement, it has the feel of Iron Frame or Metal Build.
Although the alloy skeleton brings stability and improved feel, it has to be said that some structural positions are still not enough, especially the shoulder joint mentioned in the article, because the material and the structure itself are not considered.
After the joint replacement, it is more likely to cause the problem. It is better not to change it than to replace it in the legend. Although there are solutions to the problem, it is better to always solve the problem from the root cause, but As the first project of the manufacturer, there are things that cannot be considered.
This order is also understandable. After all, it is the first time. I hope that future products can avoid such problems as much as possible.
Summary
The skeletons of these TLX Model METAL PARTS RG 1/144 RX-93 ν Gundam is already the most stable in the RG series, and there are basically no serious problems. The significance of the alloy skeleton kit may not seem so great, but if you replace an alloy skeleton.
Finally, it can further improve the stability, which is indeed not a bad thing, and the significance of the alloy skeleton, the greatest value is the feel. After all, this is really the most intuitive feeling, otherwise there would not be so many Metal Build, Iron Frame, and various Bootleg alloy products.
To put it bluntly, even if these products are made of plastic joints, they can still play with them. It can tighten the joints, but one of the biggest significance of the alloy is the improvement of the feel.
Therefore, it can be replaced with an alloy skeleton to increase the feel. It is also a relatively mainstream practice and demand in the market. Multiple choices are not a bad thing. Discussed.
Well, enough nonsense, after the above various tests, the overall performance of TLX is still quite satisfactory. Although there are some minor flaws, as the first product, it is still acceptable.
Gallery
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.gif "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.gif "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
.jpg "METAL PARTS RG 1/144 RX-93 ν Gundam, TLX Model")
![MANUAL BOOK MG 1/100 DABAN 8822 GNT-0000/FS 00 Qan[T] Full Saber, Daban Model](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgI0Ht1NeLOAdYBNdf0G1gPAgCIXjScckZVelzxd2zAF_REucwDiWdYc5wNo8IvAdbyKslRtgCMgYJRREsKoMQtCFRLnx4U7JEp6a3gKnm3yMZ74rkzpEoRv8I2zb-9GmFy2wqKZ-Cvxvln/w320-h213/MG+1_100+GNT-0000FS+00+Qan%255BT%255D+Full+Saber%252C+Daban+8822+%252819%2529.jpg)
.jpeg)
