REVIEW Metal Robot Spirits [SIDE MS] RX-124 Gundam TR-6 [Woundwort], Premium Bandai

This is a review of Bandai action figure Gunpla die-cast Robot Damashii Metal Robot Spirits [SIDE MS] RX-124 Gundam TR-6 [Woundwort] from Advance of Zeta: The Flag of Titans

Metal Robot Damashii [SIDE MS] RX-124 Gundam TR-6 [Woundwort] Review

It features a unique silhouette such as thighs with MS that is the body of a wide variety of TR-6 series. The white color is the same as Hazel.

Head Unit

The design of the head is also unique, without the forehead parts that are common in Gundam, and the antennas are attached to the left and right of the large visor. Metallic paint as usual. The close-up is a little rough, but the Vulcan is painted carefully and the markings are accurate.

Body Unit

The body is extremely thin and the design itself is simple. Like Hazle, it is all painted and has the same colors as white, gray, and yellow. Waist area is also unique and there was no front or side armor.

Arms and Legs

The arms are thin and the frame is almost bare. Its legs are particularly special, characterized by a very thick form from the thighs to the knees. The design does not have an ankle, but the heel can be opened, so it can stand on its own. Auxiliary parts that can be attached and detached are also included.

The state in which the auxiliary parts are removed and the heel is stored. The armor on the back of the waist can move up and down. The movement is also special, and the neck and waist can swing greatly. Since the waist has a deformation gimmick, it is possible to bend it more.

Raise your shoulders above horizontal. The elbows are very deep, the knees are bent about 100 degrees, and the hip joints are widely movable back and forth.

Weaponry and Accessories Option set

The packaging come with set of stands. Self-reliance was not a problem even if equipped with weapons. Fixed in 3 places: shoulder, arm and grip. The barrel is thin and long. A replacement red-hot barrel is also included.

It is also possible to reproduce claw mode. Here, the claw on the booster side is deployed and connected with the shield arm attached to the shoulder of the main body with a wire.

The booster unfolds the claw and raises the central sensor. The base of the claw can be jointed and the center can be bent. The wire was a hard lead wire. followed by deformation.

Transformation requires replacing only some parts, but it is possible without additional or surplus parts. behind. It was easier to understand the WEB instruction manual, which can be seen in color, such as the procedure.

With a dopp-like silhouette, it doesn't look like it's transformed from an MS. The wings on the legs can also be deployed during MS. A dedicated stand joint is included. It is also possible to deploy the sub-arm at the tip of the lower part of the fuselage and suspend the composite shield booster.

The instruction manual says to support it with an auxiliary support, but there was no problem without it. In this state, the strut and the booster interfere, so the stand joint needs to be installed with a slight shift. The length and height of this Woundwort is slightly higher.

Movability and Articulation

The movement is generally good as mentioned above, but the stand joint in MS was easy to come off, which was a little troublesome. Composite shield booster is big so it is quite powerful.

You can't bend your elbow while holding it, but you can if you remove the shoulder joint. Change the barrel to red heat and slash. When I tried to move it flashy, the shoulder joint came off several times. claw mode.

The wire is a hard lead wire, but when you decorate it in the injection state, you need help. The antenna often interfered with the deformation, so it seemed better to handle it especially carefully.

Summary

The Advanced OF Zeta series continues at intervals of one point, but this time Wound Wort, which is the basic form of the various TR-6 series, is on sale. Perhaps because of the emphasis on transformation, the proportions are smaller than the setting image, and the balance is different, so it seems that there are different tastes in that area, but the modeling is precise and fully painted, so the texture is good, and the movement is generally good.

The gimmick was also elaborate and finished with a high degree of perfection. It seems that the METAL ROBOT SPIRITS ADVANCE OF Z series is still going on, but the TR-6 is an MS with an extraordinary amount of variations.