REVIEW HG 1/144 ARZ-124HBIIM Aqua Hambrabi II Titans [ A.O.Z Re-Boot version ], Premium Bandai

This is review of P-Bandai plastic model kit Gunpla High Grade HG 1/144 ARZ-124HBIIM Aqua Hambrabi II Titans [ A.O.Z Re-Boot version ] from Advance of Zeta Re-Boot: Gundam Inle - Black Rabbit Had a Dream series.

P-Bandai Gunpla HGUC 1/144 ARZ-124HBIIM Aqua Hambrabi II Titans [ A.O.Z Re-Boot version ] Review

This is the HGUC ARZ-124HBIIM Aqua Hambrabi II Titans [ A.O.Z Re-Boot version ] that was shipped at the same time. The price is 3,080 yen, and this is also a Premium Bandai order item, and his package is a single color and the manual is a simple monochrome one.

As for accessories, it comes with a set of parts for Aqua Barzam, a wire for hand anchor, and a runnerless stand, as well as optional parts for Aqua Woundwort that can be used freely.

As for stickers, it comes with foil stickers and marking stickers that complement the colors of parts of the hydro-jet boost pod, around the tail stabilizer, the V-shaped part, and the chest of the Aqua Barzam.

Some whites come in orange-yellow and red, and I choose orange-yellow for Aqua Hambrabi II, and red for Aqua Barzam. Also, since the runner of Furudodo II is still used, there are many parts left over from it. Aqua Hambrabi II Titans specification that was made into a kit at the same time as the previously introduced Aqua Hambrabi II.

As the name suggests, the coloring has changed from red to dark blue, but other than that, there is no difference and it is a color variation kit. A strange and somewhat creepy design and a suspended Bahar rifle are also common. In Aqua Hambrabi II, a gimmick that transforms into Aqua Woundwort was described,

Here, the conversion gimmick to Aqua Barzam is described. Instead, there was no gimmick related to Aqua Woundwort, and although the parts were included, they were treated as bonus parts. If you buy only one of them, you may feel a little inconvenient because the replacement method for both is not listed.

A large hydro-jet boost pod is attached to the central drum frame and two underwater shield boosters are still attached. Although there is an overall volume, the connection frame etc. are made thin.

Around the nose in the center, the sensor is supplemented with a metallic green seal. The white part around the nozzle of the hydro-jet boost pod is red or orange-yellow, so it is painted or sealed. The fin part is made swingable.

The left and right underwater shield boosters are connected by an arm connected to the drum frame. Arms can be bent and rotated. The underwater shield booster has a slight cutout on the back.

The large missile hatch can be opened and closed, but it cannot be removed and is not color-coded. Also, this time, there were traces of rubbing paint on some parts of mine.

At first, I thought I had put some kind of paint on myself, but it seems to have been mixed in during manufacturing because it seems to have been kneaded into the inside without removing it even with a solvent. Various units are connected to the central drum frame.

As introduced in the review of the normal version, this drum frame has a white cover that is locked, and by removing it, you can adjust the position by rotating each part along the rail.

It's a well-made structure because it locks tightly even if it's so small. Of course the stabilizer can be swung.The arm part that attaches the Bahar rifle can also be moved.

The shape of the Bahar rifle did not change, and the tip of the harpoon was made into a separate part. The seams are also molded with steps. This time, you can use not only the included stand, but also the 3mm axis stand, but it is quite heavy, so it sometimes turns around.

I feel familiar coloring by becoming a Titans specification. However, the yellow parts are all reproduced with stickers, but they are only part of the nozzle and fins, so if you look at them from the front, you don't really notice them.

The large missile unit, which is treated as an option, is still included, so it can be installed. The hand anchor has two sets of lead wires and joints, so the injection state can be reproduced. The claw part is also movable.

Create The HG 1/144 RX-154M Aqua Barzam

The conversion to Aqua Barzam, HGUC Barzam (AOZ RE-BOOT version) is required. First, disassemble the central unit and disassemble the drum frame once. Attach the joint parts to the separated nose part.

Remove the stabilizer joint and pass the drum frame parts through the nose and stabilizer. After that, disassemble the arm that holds the Bahar Rifle, attach the white parts, remove the arm part, and reassemble.

Joints and arms are combined by passing them through the drum frame. Lock with white cover. After that, connect it to the waist part of Barzam. Remove a part of the chest armor and attach it to the waist part and attach a pipe-shaped frame.

Attach the chest armor for Aqua Barzam instead of the removed armor. After that, a hydro jet type boost pod is attached to the crotch part. For the head, remove the front mask and replace it with the Aqua Barzam. Then attach the limbs.

After that, it is rearranging the boost pods on both sides and the underwater shield booster. After removing the gray joint and removing the boost pod, bends the arm and changes the position of the shield booster.

After that, attach the boost pod on the fin. Then, attach the arm parts to the back part and attach the shield booster unit here to complete Aqua Barzam.

Combined with the voluminous Aqua Hambrabi II unit, it transforms into a very powerful figure.

In particular, the volume up of the upper body is conspicuous with a tremendously large underwater shield booster and boost pod. Since the weight is concentrated on the upper body, it is easy to fall backward if the hip joints become loose due to aging.

Self-reliance was fully possible if the stabilizer was used as a support. The unit on the back is attached so that it is sandwiched between the frames, so it is firmly connected and stable.

Disassembling and reassembling the Barzam's body and drum frame is a little troublesome, but it was not particularly difficult to disassemble and was able to reassemble smoothly.

However, since there are many joints, it seems better to keep the joints that are not used depending on the shape so that they are not lost. Goggles are attached to the head, and the shape has changed to look like it's holding a cylinder in its mouth.

Rounded chest design. It is asymmetrical and the left chest has an open gray part. Partial white of the mold is supplemented with a seal. Boost pods, stabilizers, shield booster arms, etc. are gathered on the back. There is a 3mm hole in the frame part next to the drum frame so that a stand can be used.

A boost pod that sits on top of the fins. I do not know in the future, but for now the fins do not hang down and can be held sufficiently. As for the wrist, it has an angled right handle that makes it easier to hold the rifle.

Regarding the movement of the torso, although it can swing back and forth, it cannot rotate because the back unit is sandwiched between the pipe-shaped frames. Regarding the movement of the arms, if you spread the arms, you can raise the arms sideways. Since there is a unit that is covered, it is not possible to move the arm forward as it is.

If you rotate the unit on the back, you can rotate the arm enough. Equip the Bahar Rifle. The volume of the upper body is outrageous, but the Bahar Rifle itself is also large, so I don't think it will lose power. Thanks to the angled wrist, it's good that even this design rifle is easy to hold.

Indeed, Aqua Barzam's larger and sturdier body makes it easier to handle compared to Aqua Woundwort. Its solid construction provides a sense of stability during assembly and posing.

While the boost pod on the fins of the Aqua Barzam may occasionally detach, it is a minor issue that can be adjusted to ensure a secure fit. Additionally, the model kit includes missile units and firing anchors, adding to the playability and customization options. The shield booster can rotate and swing, allowing for various dynamic poses, and it can be fixed in different positions as desired.

Although it may not be explicitly mentioned in the manual, it is possible to transform Aqua Barzam into Aqua Woundwort, as well as vice versa. Both forms are achievable, providing versatility and allowing you to explore different display options. For more detailed instructions on the combination process, it would be beneficial to refer to the reviews or assembly guides available for the normal version.

While the Woundwort Black Haze Legion version features a black color scheme, the Titans version also boasts an appealing aesthetic. The Titans color scheme complements the design well, offering an alternate and visually striking appearance for Aqua Barzam.

Enjoy the assembly and display of Aqua Barzam in its various forms, and have fun exploring the possibilities presented by the model kit.

Summary

While the color variation of the previously introduced normal version features a different coloring scheme, the Titans color edition maintains the same molding color. However, it's important to note that the accessories included with both versions are exactly the same, with no differences in content.

With the new drum frame design, this model kit provides a thin frame that accommodates various units while offering solid holding power. Despite its intricate appearance, it is surprisingly easy to handle, and the inclusion of a replacement gimmick allows for a variety of play options.

Regarding the combination instructions, the normal version focuses on the replacement of Aqua Woundwort, while the Titans color edition specifically addresses the Aqua Barzam. To ensure comprehensive instructions, it would be helpful to provide both methods for replacing and combining the respective units.