REVIEW MG 1/100 Daban 8824 MSZ-006-P2/3C Zeta Gundam P2/3C Type, Daban Model

The following is a review of the REVIEW MG 1/100 Daban Daban 8824 Red Zeta Gundam MSZ-006-P2/3C Zeta Gundam P2/3C Type, a bootleg model kit released by Daban Models.

MG Daban Daban 8824 Red Zeta Gundam Red Zeta Gundam P2/3C Type Review

Details

In terms of shape, at first glance, everyone will think that it is no different from a certain generation version. It is a big red, but in fact, this Red Zeta Gundam is completely different from a certain version in many details and the shape of the parts.

It is the detail engraved line, which is much more than a certain generation version. It can only be said that it seems to be similar at first glance, but it is still far from the actual.

Take the shape of the face as an example, a certain generation version of Zeta Gundam is very long, while the Daban 8824 Red Zeta Gundam is relatively shorter. The main changes are still in the details. As for the structure of the main body, they are basically the same. Of course, the small problems of shrinking glue have basically not changed much, and there are still some things that should be there.

Inner-frame

As mentioned earlier, because the skeletons are all the same set, although the skeleton of this Daban 8824 Red Zeta Gundam is the same set as Daban 8801, it has been corrected in a targeted manner. Like some loose parts of the 8801, the Daban 8824 Red Zeta Gundam has been adjusted more tightly (even some places are too tight) So After the whole is completed, it is basically relatively tight and will not be loose.

Of course, there are still some places that are not tight enough, which is also mentioned in the this review, but like the spherical joints at the waist, no matter how tight it is, the structure itself is not good, so even if it starts to be tight, after a round of playing and deformation Afterwards, it will still become loose, and general reinforcement is not particularly helpful for this spherical waist.

This is a hard injury left over from the structure, so gives a targeted plan to modify the spherical waist, which is to change the spherical shape to a cylindrical shape, so that the problem of the waist will be loose completely.

How to modif instability of the waist ball

In fact, this problem is already a common problem in the MG Z series products, whether it is the original Bandai or Bootleg Daban Model one. Although the reinforcement can play a temporary role, it will be the same after a long time.

If there is a problem, and if it is simply reinforced, it may lead to more serious problems caused by breaking the PC part after the ball becomes thicker, so the following solution is a once and for all.

The transformation method is to change the original spherical structure into a cylindrical structure, so that the stability of the waist can be maintained. The materials used are the PC parts that are usually produced.

Water-slide Decal Problems

The biggest problem of the whole product is the water-slide decal, which is really a pain in the ass, because the Daban 8824 Red Zeta Gundam itself is a modified version, many details are quite different from the version of a certain generation of Zeta Gundam, but the style of the water sticker part still adopts the style of a certain generation version, so that the water sticker cannot be used directly on the Daban 8824 Red Zeta Gundam body.

The sticker indicates that many of them can only be used after post-cutting, otherwise the position will not be correct. The stickiness of the water sticker this time is low, it is not easy to apply.

Deformation

As far as the deformation is concerned, it is not too difficult at present. There are also more detailed deformation steps in the manual. Just follow the instructions.

It's just because many places are tight this time, so the deformation of some places still needs to be paid attention to, especially the stretching of the calf, because that position is a little tight, so make sure to be sure when deforming.

It is enough to stretch it in place, and because of this modeling problem, many parts are very sharp and thin, so try to be careful when playing with deformation.

Summary

Overall, the performance of the MG 1/100 Daban Daban 8824 Red Zeta Gundam MSZ-006-P2/3C Zeta Gundam P2/3C Type (Red Zeta Gundam) this time has been improved compared to those of the 8801 products. However, in order to adjust the stability of the product, there are more product mix problems, which is also criticized.

The performance after the overall completion is finally acceptable. Except for the water-slide decals that cannot be used well, the others are basically the normal performance of the manufacturer. Of course, this is a series of resonance products after all.