REVIEW Metal Build Plus GAT-X105+AQM/E-X01 Aile Strike Gundam, Mo Show

The following is a review of Mo Show Metal Build Plus GAT-X105+AQM/E-X01 Aile Strike Gundam, an action figure die-cast released by Mo Show Factory based on the Mobile Suit Model from Mobile Suit Gundam SEED series.

Mo Show Metal Build Plus GAT-X105+AQM/E-X01 Aile Strike Gundam Review

Head Unit

Whether it is a gunpla, a finished toy, or a figurine, everyone is most concerned about the head problem. The head is good, but still not restored, this will affect the effect of the entire product. As far as the products I currently have, I personally think that this head effect is really well done.

From the shape, to the appearance, to the painting, there is no trace of laziness at all, ranging from the shape of the mask to the small When it comes to the detailed painting, it is all made meticulously, and even the details behind the antenna, which are not often seen, are painted and separated.

Moreover, the design of the mask Citroen adopts the more popular hollow design, which is more three-dimensional. The contours and edges of the parts have a water chestnut feel, and there is no so-called meat. The antenna part is made of soft material with toughness.

Even if it is bent and folded as in the evaluation, there will be no problem at all, which better avoids the weak position of the antenna from being broken due to factors such as playing or transportation. It seems that the manufacturer has put a lot of effort into the precision of the mold and the selection of materials.

Body Unit

The proportion of the entire main body is quite satisfactory. The proportion basically reaches the standard of 1:72 scale. The painting and details of the body are also in place, especially in the inner side and inner wall of the parts.

In the places that are not easy to see, the manufacturers pay attention to detail color separation, such as skirt armor, shoulders, nozzles, etc., which have detailed color separation coating. Moreover, the painting positions are very precise, and there is basically no problem of large-scale painting edges or not in place. This kind of problem usually has a high chance of appearing on finished toys. And although there are many details, the overall matching It seems very reasonable, and it will not add some unnecessary details to show the details.

The main body can also be seen by many designers careful design, such as the linkage of the shoulder armor spring device, the sliding of the arm armor, the linkage of the leg armor, etc., all of which leave a good impression. The main frame is also made of alloy frame material, which makes the whole product more impeccable in terms of feel and control.

AQM/E-X01 Aile Striker Unit

In fact, there is basically nothing much to say about the Aile Striker Unit. The whole is relatively simple, the painting is still very detailed, and the backpack design has also joined the activity design of the small wings like MG or PG products.

And like the main body, a light-emitting module is added, and the turbine parts of the injector are frosted and transparent parts, so that when the light is on, the frosted and transparent parts are treated to isolate the light, so that the effect of the light transmission is softer and more beautiful.

Led Unit

As one of the highlights of this product, the lighting effect, in order to increase the highlight of the product, the designer specially added a lighting module inside the product. After a simple power connection, the model can be made to emit light. Because the design is more reasonable, the effect after lighting increases the beauty and momentum of the model.

Make models that appear dull and dull suddenly come to life. Played a finishing touch. The light group uses a built-in low-light source LED light group. Even after the light is on, the model will not look like a lantern because the light is too bright, which is in place.

Power circuit design problem is also one of the relatively criticized problems, because the circuit adopts an external combination, so when the light is usually not turned on, the power line will have a long line exposed outside the body. Even after storage, there will be a section of exposure. Which makes it a little unsightly in appearance. In fact, the exposed parts are all behind, generally not visible from the front, which is also a part of the design missing.

Movability and Articulation

This is also one of the key points for a finished product. After all, no matter how good the finished product is, the meaning is reduced by more than half, but from the point of view of MS products, there is no problem with the movable aspect. ,

Arms, thighs, head and other positions have adopted the more popular joint design nowadays, so some squats, big bent legs, and large head rotation swings can be easily placed without a certain pressure. In terms of hand shape, it does not use the Metal Build logo shape hand, but uses a 5-finger fully movable palm like PG, which greatly increases the playability. Coupled with the design of the alloy skeleton, the party can play with peace of mind as they wish.

due to the unreasonable design of some parts, the movement of some places is limited by the design, such as waist rotation, rear skirt armor, movable abdomen and other parts have different degrees of movement. Unfortunately, most of them are movable. It's good, but in these small places, the design fails to take into account.

Finishing

In terms of MS painting, from my current point of view, it is no exaggeration to say that the painting of MS is the first in terms of produced Gundam products. From head to toe, from large parts to detailed parts, the painting of MS is not sloppy at all, just like some small arm power pipes, and the detailed painting on the outside of the armor, there is no painting problem at all.

Even the color separation of a beam rifle has as many as 6 color separations, and they are all perfectly separated without the slightest problem. From my personal point of view, whether it is a Gundam finished product or a transformers product, it is very difficult to do. This is a big test for the manufacturer's production strength and investment energy. From these aspects alone, it can be seen that MS's investment and requirements for this product are really unprecedented and strict.

Details

First of all, there is the issue of proportions. The proportion of arms, the overall look may not be obvious, but when compared alone, the problem of too thick arms is relatively obvious, especially When looking at the arm alone, it is obvious that the design of the arm will be slightly thicker. Proportionally, it may be similar to the thigh, and the proportion is a little out of balance, which is indeed one of the regrets.

The problem that the metal soles are easy to fall off the paint, this problem does exist in the evaluation piece, and I have also reported to the manufacturer that the manufacturer has made adjustments. Goods will avoid this problem.

Some of the details of the painting have the problem of insufficient painting. This large product will also be improved and avoided as much as possible. It is reported that the exposed wires will be adjusted, but what will happen in the end is unknown at present. This is a rumor, whether it is changed or not. The problem of the finger nozzle of the movable palm is also said by the manufacturer.

Summary

This is the review of Mo Show Metal Build Plus GAT-X105+AQM/E-X01 Aile Strike Gundam. As the first bullet, it has very high requirements for product quality and craftsmanship, and there is no sloppy meaning at all. Although there are still some imperfections in the design of the first product, it cannot be perfected, but compared with the quality of the entire product and the product, the flaws are not concealed, and the overall is quite brilliant, which is a product worth looking forward to.

As far as the current manufacturer's pricing is concerned, it is really very conscientious compared to MB's moving price of thousands. If you are more interested in the finished product, I suggest you pay more attention to this manufacturer. Of course, if you have sufficient funds, you consider this product, which is definitely worth the money and will not disappoint.