REVIEW RG 1/144 RX-93ff ν Gundam, Gundam Base Limited

This is review of assembly plastic model Gunpla RG 1/144 RX-93ff ν Gundam from Gundam Side-F Original series Bandai.

Review RG 1/144 RX-93ff ν Gundam

There are 9 new runners, big and small! Check out the kit attention points.

The new runner comes with not only long range fins and funnels, but also exterior parts with fine details and changed shapes. The total number of sheets is 9 In total. This is a multicolor molding runner that mainly constitutes a long range fin funnel.

These are also two runners that mainly make up the long range fin funnel. The white runner can also see the back parts with added details. Further shape and details. Includes 6 runners that make up the exterior with different parts division.

The included realistic decal. It's quite large, and if you like to put caution marks, it's a volume of delight. The emblem also comes with a water transfer decal. This is a nice consideration for painters.

The manual describes the settings of "RX-93ff ν Gundam" in detail. This is also a point I want to check. Let's take a closer look at the main body!

Now, let's take a look at the long-awaited main unit. The coloring and markings, and above all, the long range fin funnel on the back give a fresh impression. From a fluttering angle that is more reminiscent of a statue.

From the other side, the impression changes greatly depending on the position of the long range fin funnel. A little bird's-eye view. It is an angle that is difficult to see in a full-scale statue. It is an angle that makes the long range fin funnel claim stronger

Let's take a look at the up shot from here. Up your upper body. Even so, the amount of information and the sense of density are amazing. A silver sticker that conforms to the details of the statue is affixed to the slit of the antenna.

Chest, the blue body color is fresh. The waist characteristic front armor line is the eye-catching part. The metallic seals on each part enhance the mechanical atmosphere. Arms bright emblem on the left shoulder stands out.

The exterior of the upper arm is a new part with added details. Also pay attention to the shoulders. Not only the details have been added to the shoulder part, but also the mechanism has been changed so that the front armor at the bottom is connected to the shaft part of the shoulder.

Due to the change in the connection method, when you raise your arm, the lower armor will be interlocked and stored in the upper armor. In other words, it is a gimmick that the same structure as a full-scale statue can be reproduced!

For reference, one photo of the full-scale statue moving. You can see that the lower part of the shoulder armor goes under the upper part. This is also a hand part that conforms to the pose of the statue, which is also included as a new part. The back of the hand is also a new part with added details.

There is also an emblem behind the right shoulder. The beam saber pattern is on the left arm. Legs emblem of the right sneak stands out. From the side. The blue calf exterior is also a new part.

The finely attached metallic stickers give a perfect sense of density. The ankle is a new part with the blue part on the heel side divided. Can you see that the colors are slightly different on the top and bottom?

If you look at the picture of the full-scale statue, you can see that the colors are different on the top and bottom. The trick is fine! Pay attention to the long range fin funnel! The base is a mechanical part where the amount of information is tightly packed.

The slender tip is also beautifully finished. From the angle you can see through ν Gundam. The joint parts that connect the main body and long range fins and funnels are flexible.

This allows you to freely change the angle of the long range fin funnel without replacing the joint parts. Furthermore, it is also the charm of RG that it comes with abundant optional parts such as weapons and hands. Also note that the beam rifle and the new hyper bazooka are in RX-93ff color.

This makes it possible to display with an armed heap as shown in the picture. Let's take a closer look at the long range fin funnel! Finally, let's take a closer look at the long range fin funnel, which is the centerpiece of this item.

The red line in the center is reproduced by dividing the parts. The base is up. It is a very complicated surface structure. Since it's a big deal, I tried arranging long range fin funnels of RG, EG, and BB warriors. From the front, RG, EG, BB warriors. Both are incredibly complete.

From here, let's look at the transformation sequence to the firing state. First, unfold the hinges on the left and right of the center.

Next, raise the top cover. And when you pull the yellow wing at the back, the upper and lower fins at the tip expand in conjunction. This is a cool gimmick! This completes the transformation to the firing state.

Raise the folded joint as shown in the photo to reproduce the long range fin funnel over the shoulder, which was impressive in the special video. If you rotate the joint further and install the long range fin funnel.

In the state of firing over the shoulder like a shoulder cannon. The silhouette has changed dramatically and this is also cool! It is also an ant to combine with a normal weapon!

Furthermore, if you attach the attached joint parts to the right arm, you can reproduce the arm wearing state. This was also a very impressive form, so I'm happy to be able to reproduce it.

If you use Action Base 5, which is sold separately, you can also display a long range fin funnel independently. It is also an ant to decorate it separately from ν Gundam.