MG 1/100 Gundam Mk-II [ Banagher Links Custom ] by @yasutatsu
MG 1/100 Gundam Mk-II [ Banagher Links Custom ] by yasutatsu is a gunpla custom build by a builder with name yasutatsu with gumpla.jp account @yasutatsu.
Gunpla Custom Build : MG 1/100 Gundam Mk-II [ Banagher Links Custom ] by @yasutatsu
The MG 1/100 Gundam Mk-II [ Banagher Links Custom ], masterfully customized by the Gunpla builder @yasutatsu, stands as an exemplary model of unique modification and intricate detailing.
yasutatsu modified the MG Gundam Mk-II Ver.2.0 to replicate the Banagher machine featured in the manga "Gundam UC episode EX2: Return of the Lion."
As usual, yasutatsu began by partially painting the frame and dark-colored parts of the backpack and bazooka. The rest of the exterior received a complete paint job, accompanied by the application of numerous water transfer decals and a matte top coat. Additionally, Rapi tape was applied to the twin eyes and sensor area, while metal parts were affixed to enhance details.
The original kit had a muscular body type, so yasutatsu made modifications to impart a sleeker appearance. The beam magnum was borrowed from the Unicorn Ver.Ka, and Doven Wolf's right arm was semi-scratch-built using the kit as its core.
Here are some specific modifications I made:
Head
- Enlarged by 2mm in the front and back.
- Rounded the tip of the eaves and shaved the draft surface on the back to flatten it.
- Sharpened the antenna part and reduced the size of the mask based on Gundam Ver.Ka's chin.
Chest
- Reduced shoulder width by about 2mm on each side.
- Shortened the neck and chest ducts, and increased the size of the block at the base of the shoulder to create a smarter appearance.
Left Arm
- Assembled the gray parts upside down to bring the shoulder closer to the body.
- Narrowed the shoulder width by about 4 to 5mm.
- Lowered and re-glued the duct part on the outside of the shoulder to reduce overhang.
- Extended the forearm by 2mm.
Right Arm
- Semi-scratch-built using plastic board, Epo putty, and plastic pipe.
- Ensured the outer arm cylinder remained static to maintain balance.
Waist
- Extended the front skirt by 2mm.
Legs
- Trimmed the front slippers by more than 2mm.
- Raised the gray part on the top of the foot by 1mm.
Weapons
- Used the Beam Magnum from Ver.Ka as is, erasing seams in conspicuous areas.
- Made the bazooka from the kit, grooving the seams.
The final result is a heavily armed, smartly modified Mk-II, capturing the essence of the Banagher machine from the manga. Despite some ruggedness in the right arm, I believe it adds character to the aircraft. My next project may involve a 1/144 model, and I'm considering an honest modification of a kit aircraft. Thank you for your interest in my work.
Details
- Title : MG 1/100 Gundam Mk-II [ Banagher Links Custom ]
- Builder : yasutatsu
- Base Gunpla: MG 1/100 RX-178 Gundam Mk-II Ver. 2.0 (Titans), Bandai