REVIEW HiRM 1/100 DABAN 8825 XXXG-01W Wing Gundam [Endless Waltz ver.], Daban Model

 This is review of DABAN 8825 HiRM 1/100 XXXG-01W Wing Gundam [Endless Waltz ver.] from Mobile Suit Gundam Wings Endless Waltz series, a plastic model High Resolution Models Gunpla bootleg from Daban Model.

DABAN 8825 HiRM 1/100 XXXG-01W Wing Gundam [EW ver.] Review

The board of the sample is much cleaner this time. Compared with the previous dusty sample boards, it is much cleaner, and there are fewer scratches (but by convention, large goods are often cleaner than samples. some). However, it is still an old problem, and there are still many cases of shrinkage, which are mainly concentrated on white boards.

Snapfit

The question of the combination of things and things is also mentioned in the evaluation chart. Except for the skeleton and the shown parts that are too tight or too tight, the combination of other outer armor parts is good, and after the outer armor is combined, There is basically no loose or easy-to-drop parts, and they are relatively tight. Even some positions where the C buckle is prone to problems are done relatively well, which is not bad. 

As for the problem of tight skeleton, it's relatively For the body of such a large backpack, if the skeleton is not tight enough, the stability will definitely not meet the requirements of playing, so a tight skeleton is still necessary, but whether everyone likes it, that is different. People have different opinions, and I won't discuss too much here. As mentioned above, if you don't like the ones that are too tight, you can do some treatment before assembly.

In terms of restoration, except that the face cannot be restored absolutely (although it is different from the original version, but at least it can be seen and not broken.) Other places, such as skeleton color separation, outer armor restoration, and detail restoration , structure, etc., has basically been restored to a great extent.

Joint and Movability

Because the overall firmness of the kit is good, it is very good to play, there will be no situation of not lifting or loosening the waist and joints, and the holding force has a good performance. However, because of the tightness of the joints, you still need to pay attention when playing, don't pull hard, turn and twist along the direction of the joints, so there will be basically no major problems, and there will be no problems with parts falling out. (I can't guarantee the operation of violently playing or holding the model as a windmill.)

Finishing and Details

The color separation of the parts is basically based on the original version. The skeleton part is the same as the previous 8820. It is based on the color separation of the original version. Except for those 3 alloy parts that are not alloys, the rest are basically divided Color is in place. The outer armor part is basically the same as the original version, there will be a lot of small pieces, mainly for the purpose of color separation, but at the same time, it will also produce a lot of useless waste like the original version.

The antenna part is the same as the original version. The newly opened molds are all new styles. The antenna that directly uses the old version of the Master Grades.

Summary

Overall, the performance of the kit is still ok. It is relatively good in the 88 series, and the retail price for this product, it is still worth it.

Gallery

Runner

The Difference Between Daban 8825 vs HiRM Wing Gundam Bandai

Because this model of HiRess machine has also been released before, in knowing the difference between the two, so I will talk about it here, and list it in a few points:

The difference between the skeleton, the skeleton of 8825 is made according to the original color separation, so different parts of the skeleton parts will have different color separation processing. in place. As for the mold maker's soul, what everyone has done is relatively clear. There is no color separation treatment, and it is all gray. And the skeleton is not as tight as 8825, there will be loose problems in many places after assembly.

In terms of detail restoration, as mentioned earlier, 8825 is basically restored at a 1:1 ratio, and all the details are basically there, but there are a lot of missing details on the mold maker's soul side, and many details are missing. Harmony has been lost, and there are many details from the main body to the weapon that have not been restored. Although this may not be a big deal for players, it is just like this. Whether to accept it or not can only be left to everyone to choose. As for the facial features, neither of them can directly restore them, but neither is ugly, and each has its own characteristics.

Combination degree, on the 8825 side, in addition to the skeleton, the combination of the gun and the shield will have different degrees of tightness or too tightness. The combination of other outer armor parts is basically no problem, and the tightness after the combination is also Yes, it won't fall off easily when playing. In the case of the molder's soul, because mine was painted later by myself, it is not very clear whether there is a problem of too loose or too tight in the prime group state, but The connection of the modeling hand and the connection of the skirt are indeed loose or very loose, and it is easy to loosen if you play.

The problem of defects, this is not easy to say, because from the overall point of view, except for the most obvious difference of the antenna, the other differences do not seem to be so obvious. As for the shrinkage and other problems, the 8825 has it. There are also souls, no one is better than the other. In terms of sharpness, because my molder soul is a finished product of my own post-painting, it is definitely much better than the effect of the prime group in terms of look and feel, but according to the past records, The difference in the sharpness of the parts between the two is not very big. If you insist, maybe the soul of the molder will be better in some places, but the overall difference is not big.

Related Article