REVIEW RMS 1/144 SCVA-76 Nahel Argama Catapult Deck, Megahouse

This is Review of RMS 1/144 SCVA-76 Nahel Argama Catapult Deck from Megahouse. RMS Nahel Argama is a carrier ship model from Mobile Suit Gundam ZZ series.

Megahouse Realistic Model Series 1/144 SCVA-76 Nahel Argama Catapult Deck Review

This is the "Realistic Model Series", where you can enjoy an immersive display Nahel Argama's catapult deck from "Mobile Suit Gundam ZZ", which celebrated its 35th anniversary. This item, which exceeds the size of the previously released Argama Catapult Deck, is approximately 1,380 mm in maximum mode, making it a volume that can be said to be truly non-standard.

Along with the overwhelming sense of size, you will be fascinated by the realistic pre-applied paint, which is also a feature of the RMS series. *This item is a pre-painted semi-finished kit.

By inserting the tip of the catapult deck into the base where the launch waiting compartment is installed, you can select the center, left and right catapult decks. From behind is an angle where the shadow of the paint shines.

The Deck markings of each part can be reproduced by pasting the attached water transfer decals. The single beam cannons attached to the left and right catapult mode can be slightly changed with the connecting shaft, and can also be removed. One of the highlights of this item is the launch waiting room. Various gimmicks are installed.

The details on the walls are also spotless. The anti-aircraft machine gun seat on the side can rotate the base and move the barrel up and down. The display has an expression.

The shutter part of the waiting room can be opened and closed. To open, first pull out the base and lift the shutter. After lifting the top of the shutter horizontally, pull out the claw at the bottom tip of the shutter, align the top and bottom, and finally insert it into the base to open it.

The hangar is made up of a combination of the ceiling, the rear, and the left and right sides. By removing the ceiling and sides as shown in the photo, you can display the inside of the hangar.

The photo shows the back side of the ceiling of the waiting room. Equipped with an LED light, you can illuminate the inside of the refrigerator with a switch. The atmosphere is outstanding. The back side of the shutter and the details on the wall are also. If you zoom in further, you can enjoy the perspective as if you were inside the refrigerator.

When you get close to it, the feeling of being there when it takes off increases even more. The angle that emphasizes the length of the deck is also cool. When switching between the left and right catapult deck modes, flip the top of the deck.

After changing the position of the machine gun seat on the side of the waiting room, the light mode is completed. Now let's launch Hyakushiki. The angle from behind is also cool.

By the way, this is the catapult shuttle that carries the MS. The right side of the photo is an arm for MA display. The catapult shuttle can slide smoothly on the deck. Bundodo is progressing. When displaying MA, combine the arm with the shuttle as shown in the picture.

The tip of the arm has a 3mm axis, and various MAs can be held from behind. *When displaying "HG 1/144 ReZel" as shown in the picture, it is necessary to process the crotch shaft of the Rezel body. Finally, let's take a look at the center mode, which is the longest in the series, about 1380mm. To put it simply, it's about the length of a lying down elementary school student. On the back of the deck for center mode, impressive details of the Nahel Argama are engraved.

In the center mode, connecting parts are attached to the left and right of the waiting compartment. With this connecting part, if you purchase 3 of these items, you can reproduce the 3 catapults as shown in the photo. By the way, you can attach connecting parts to the outside of the left and right catapults, so if you feel like it, you can add 5 or 7 catapults.

The best part about this item is that you can combine it with various items. It's a specification that assumes Nahel Argama from "Mobile Suit Gundam ZZ", but of course it's OK to display a UC unit.

Summary

This is summary of the review of "Realistic Model Series Mobile Suit Gundam ZZ (for 1/144 HG series) Nahel Argama Catapult Deck". It's easy to get caught by the overwhelming size, but the details, sculpting, and painting are also wonderfully finished items, so this is me. If you think that (with a large house), please try to display it with a triple catapult. It might be interesting to make your own damaged left catapult, aiming for Nahel Argama in "Mobile Suit Gundam UC".