REVIEW MG 1/100 Daban 6653 GN-002 Gundam Dynames, Daban Model

The following is a review of the Gunpla MG 1/100 Daban 6653 GN-002 Gundam Dyname released by the Gundam plastic model bootleg manufacturer with the Daban Model label.

MG Daban 6653 GN-002 Gundam Dynames Review

Daban Model is a bootleg manufacturer from China. Bootleg here is interpreted as a copy or counterfeit goods released without a license.

Head Unit

REVIEW MG 1/100 Daban 6653 GN-002 Gundam Dynames, Daban Model

You must pay attention to the combination of the sight component of the head, and remember to deal with it in advance, otherwise problems will inevitably occur. You also need to be careful in changing the sniper mode's gimmick mode on his head, because this can cause some parts to break.

Body Unit

The body is almost the same as the original Bandai release, only different in some parts of the snapfit that are less tight and also the details are not so clear. Join is also quite similar between Daban 6653 and Bandai.

Weapon

In the weapon section you need to shorten the handling section so that it can be rotated.

GN Drive

The Led Units that you get in Daban 6653 are 2 pcs. This LED unit is also quite different from the previous Daban releases which copied Bandai. You only need 1 pcs CR927 battery to power this Led Unit.

This Led unit set is not like the previous contact type with a copper sheet, but come with a new circuit board Led set module. Only the Led Shell is assembled and the circuit board is installed. It's fine, it's good, no need to go outside to buy LED lights separately.

Details

The restoration of the overall details can be considered. The difference is the size and thickness of the details. The only harmonious is the driving. Harrow on the inner wall of the cabin (but the thing itself is on the inner wall of the skeleton part, and it is basically an invisible thing. It is dispensable and purely psychological.)

From the perspective of reduction, it is still OK, it can be regarded as the standard of the manufacturer. Moreover, the linkage structure and various open structures have everything there should be, and there is no harmony or serious problems. Compared with other Daban 66 series product, it is basically qualified.

Snapfit

In terms of combination, the combination of recent Daban 66 products is not a big problem. It is acceptable, but this time, everyone should pay attention to the combination of the sight component that slides on the head.

Because the part combination tenon is made thick, it leads to the problem that the direct installation will cause the parts to break, and this place is still an active mechanism, so here again, this place must be assembled in advance. The other places are basically nothing. Just follow the instructions in the evaluation and deal with them appropriately.

The clear color of the Daban 6653 elastic part is different from the Bandai release. Although it is still transparent, the blue color looks more metallic.

One of the more regrettable parts in the kit is the included soft rubber conveyor belt accessories, because the original version is a soft rubber part with a laser effect, but the Daban Model produced one does not have the laser effect, and the color is not right.

The snapfit problem, which is often a bit loud or doesn't fit, is still a problem with this Daban 6653. There are several parts that need to be fixed on the Peg.

Summary

In terms of configuration, it is basically same as the original configuration, and the original version itself does not come with any water stickers, so this is the same.

This is a bit puzzling, although It is said that some post-remedial methods can be carried out as in the article to correct, but the problem is still a problem.

In the sticker section, I personally think that the stickers of the recent Daban 66 products are good. The adhesion and toughness are better than the previous ones. They are not so easy to tear, but unfortunately there is no special indication printed on the sticker on the chest.

The hatch basically blocks the luminous part of the chest, and it is also seen under normal circumstances. There are not too many luminous effects, except for the case of opening the hatch, so everyone does not need to be too entangled.

The details, movable, structure, configuration, etc. of MG Daban 6653 Gundam Dynames are basically in line with the requirements of a Daban 66 series product. I personally think that the quality is similar to the previous 6654. It is a good thing, although It's still the old problems, minor revisions, but the overall effect of the basic group is basically satisfactory.