REVIEW ROBOT SPIRITS [SIDE MS] RX-93ff ν Gundam, Gundam Base Limited
This is review of action figure Gunpla Bandai Gundam Base Limited Robot魂 Spirit <SIDE MS> RX-93ff ν Gundam from Gundam Side-F : Full Scale Gundam at Gundam Park Fukuoka.
action figure Gunpla Bandai Gundam Base Limited Robot魂 Spirit <SIDE MS> RX-93ff ν Gundam Review
The ν Gundam statue in Fukuoka is turned into a Robot Damashii [ RoDa ]. The modeling is completely new, and the coloring and markings are faithfully reproduced.
Head Unit
The head has almost the same design as the normal ν Gundam. A 3-stage type with an unusual slit. The eyes are painted metallic as usual, and the ducts are painted accurately. The antenna markings were unique.
Body Unit
The body is almost the same as the normal Nu Gundam, but the parts that were black there have changed to blue here. Details such as shape and coloring were improved in this area.
Arms and Legs
The parts that used to be black are now blue, and there are more details such as molds. Amuro mark of flashy color on the left shoulder. Precisely print even small characters. Like the normal ν Gundam, the arms are asymmetrical, and the beam saber deployment gimmick is also reproduced.
The calf thruster cover can also be deployed. Both the neck and waist can swing greatly, and the shoulders can be raised almost horizontally. it was able to bend the knees deeply. The hip joint is a drawer type and has good grounding. The shoulders can be pulled forward about 50 degrees, and the hips can rotate about 45 degrees.
Weaponry and Accessories set
A saber blade can be attached as an effect. The rifle can also be mounted on the back of the waist by pulling out the pin. Installation is a simple joint method.
Equipped with a huge long range fin funnel on its back. There was no problem with independence because it was attached just below. There are 3 holes in the long range fin funnel, and the mounting position can be selected.
When using the rear hole, replace the backpack joint with a dedicated one. Connected with rear hole. Since the joint on the back is movable, it can be deployed forward as it is. The long range fin funnel could also be attached to the right arm. the other side. With the normal Robot Damashii [ RoDa ] ν Gundam. It was almost the same size as this one.
Movability and Articulation
The articulation is almost the same as the recent ver. ANIME series. The shoulder and hip joints were pull-out, and the other parts were flexible and easy to move. The long-range fins and funnels can be attached to different positions, but there are no gimmicks such as deployment.
That will be reproducible by using an option set that will be sold at a later date. There was some interference with my waist, so it was barely 45 degrees and I couldn't go around that far. There was no stand joint and it was a type that was inserted directly into the hole in the crotch. It was a little worried that the beam saber mounting part of the backpack was easy to come off.
Summary
It seems that it was released quite early in Fukuoka, but it was released after a long time. The proportions, sculpting, coloring, markings, etc., of the actual statue are faithfully reproduced. Although there is no funnel or deployment gimmick, it was easy to handle and overall it was a good result.
Gallery
Related Article
- ROBOT SPIRITS [SIDE MS] RX-93ff ν Gundam, Gundam Base Limited
- MANUAL BOOK ROBOT SPIRITS [SIDE MS] RX-93ff ν Gundam, Gundam Base Limited
- REVIEW ROBOT SPIRITS [SIDE MS] RX-93ff ν Gundam, Gundam Base Limited